Translatinator - GpsPrune

Ukrainian translations of GpsPrune

To edit any of these Ukrainian texts, just click on a cell in the fourth column of the tables.

Menu entries

Id	Description	English	Ukrainian
`menu.file`	Menu for file operations	File	Файл
`menu.file.addphotos`		Add photos	Додати фото
`menu.file.recentfiles`	Submenu for list of recently-used files	Recent files	Прийняті файли
`menu.file.save`	Save as text file (not KML or GPX)	Save as text	Зберегти як текст
`menu.file.exit`		Exit	Вихід
`menu.online`	Online menu, for functions which download from or upload to the internet	Online	Онлайн
`menu.track`	Track menu	Track	Трек
`menu.track.undo`		Undo	Скасувати
`menu.track.clearundo`	Clear the list of operations to undo	Clear undo list	Очистити список змін
`menu.track.markrectangle`	Allow you to drag a rectangle and mark all the points inside it	Mark points in rectangle	Позначити точки у прямокутнику
`menu.range`	Range menu	Range	Інтервал
`menu.range.all`	Select all points	Select all	Вибрати усі
`menu.range.none`	Select no points	Select none	Скасувати вибірку
`menu.range.start`	Set the start of the range selection to the current point select from this point onwards	Set range start	Початок інтервалу
`menu.range.end`	Set the end of the range selection to the current point select up to this point	Set range end	Кінець інтервалу
`menu.range.average`	Make a new point which has the average position of the selection	Average selection	Точка по середньому
`menu.range.reverse`	Reverse the order of points within the selected range, so that ABCDE becomes EDCBA	Reverse range	Перевернути інтервал
`menu.range.mergetracksegments`	Make the selection a single track segment	Merge track segments	Злити сегменти треку
`menu.range.cutandmove`	Move the selected range to before the currently selected point	Cut and move selection	Вирізати і перемістити вибірку
`menu.point`	Point menu	Point	Точка
`menu.point.editpoint`		Edit point	Редагувати точку
`menu.point.deletepoint`		Delete point	Вилучити точку
`menu.photo`	Menu for photo operations	Photo	Світлини
`menu.photo.saveexif`	Save coordinate data to Exif of jpeg files	Save to Exif	Зберегти в Exif
`menu.audio`	Menu for audio operations	Audio	Звукозаписи
`menu.view`	Menu for View operations	View	Вигляд
`menu.view.showsidebars`	Show or hide the left, right and bottom panels	Show sidebars	Показати панель
`menu.view.browser`	Open a browser with a map of the area (not inside GpsPrune window)	Map in a browser window	Відкрити мапу в браузері
`menu.view.browser.google`		Google maps	Мапи Google
`menu.view.browser.openstreetmap`		Openstreetmap	Openstreetmap
`menu.view.browser.mapquest`		Mapquest	Mapquest
`menu.view.browser.yahoo`		Yahoo maps	Мапи Yahoo
`menu.view.browser.bing`		Bing maps	Мапи Bing
`menu.view.browser.inlinemap`		Inline map
`menu.view.browser.graphhopper`		GraphHopper
`menu.settings`	Settings menu	Settings	Налаштування
`menu.settings.onlinemode`	Checkbox for online / offline mode	Load maps from internet	Звантажити мапи з Інтернет
`menu.settings.autosave`	Automatically save settings when exiting program	Autosave settings on exit	Автоматичне збереження при виході
`menu.help`	Help menu	Help	Допомога

Popup menu for map

Id	Description	English	Ukrainian
`menu.map.zoomin`	zoom in, make everything bigger	Zoom in	Збільшити
`menu.map.zoomout`	zoom out, make everything smaller	Zoom out	Зменшити
`menu.map.zoomfull`	zoom so that all points can be seen	Zoom to full scale	Збільшити до повної шкали
`menu.map.newpoint`	Create new point at the click position	Create new point	Створити одну точку
`menu.map.drawpoints`	When this is activated, each left-click will create a new point at that position	Create series of points	Створити кілька точок
`menu.map.connect`	Connect track points with a line	Connect track points	З’єднати точки треку з лінією
`menu.map.autopan`	when a point is selected out of view, automatically pan the view so that the point can be seen	Autopan	Відобразити вибране
`menu.map.showmap`	Show map from openstreetmap behind track	Show map	Показати ОСМ-мапу
`menu.map.showscalebar`	Show scalebar (km or miles)	Show scalebar	Показати лінійку масштабу
`menu.map.editmode`	When activated, points can be dragged	Edit mode	Режим редагування

Alt keys for menus

Id	Description	English	Ukrainian
`altkey.menu.file`	The accelerator (with Alt) to open each menu	F	F
`altkey.menu.online`		N	N
`altkey.menu.track`		T	T
`altkey.menu.range`		R	R
`altkey.menu.point`		P	P
`altkey.menu.view`		V	V
`altkey.menu.photo`		O	O
`altkey.menu.audio`		A	A
`altkey.menu.settings`		S	S
`altkey.menu.help`		H	H

Ctrl shortcuts for menu items

Id	Description	English	Ukrainian
`shortcut.menu.file.open`	The shortcut (with Ctrl) to activate each menu item	O	O
`shortcut.menu.file.load`	(from GPS)	L	L
`shortcut.menu.file.save`		S	S
`shortcut.menu.track.undo`		Z	Z
`shortcut.menu.track.compress`		C	C
`shortcut.menu.range.all`		A	A
`shortcut.menu.point.edit`		E
`shortcut.menu.help.help`		H	H

Functions

Id	Description	English	Ukrainian
`function.open`		Open file	Відкрити файл
`function.importwithgpsbabel`		Import file with GPSBabel	Імпорт файлу зGPSBabel
`function.loadfromgps`		Load data from GPS	Вивантажити з GPS
`function.sendtogps`		Send data to GPS	Завантажити в GPS
`function.exportkml`	Export data	Export KML	Експорт в KML
`function.exportgpx`	Export data	Export GPX	Експорт в GPX
`function.exportpov`	Export file for 3d rendering	Export POV	Експорт в POV
`function.exportimage`	Export map image	Export image	Експорт зображення
`function.editwaypointname`		Edit waypoint name	Редагувати ім’я шляхової точки
`function.togglesegmentflag`	Turn the segment flag of the current point on and off	Toggle segment flag
`function.compress`	Start the compression algorithms	Compress track	Стиснути трек
`function.marklifts`	For ski tracks, mark all the ski lifts for deletion	Mark uphill lifts
`function.deleterange`	Delete the currently selected range	Delete range	Вилучити інтервал
`function.deletemarked`	Delete the points which have been marked by compression or rectangle	Delete marked points	Вилучити позначені точки
`function.croptrack`	Crop the track to just contain the current selection	Crop track	Обрізати трек
`function.interpolate`	Insert new points between each pair of points, equally spaced along straight lines	Interpolate points	Інтерполяція точок
`function.deletebydate`	List the dates from the track and select which data to keep and which to delete	Delete points by date	Вилучити точки за датою
`function.addtimeoffset`	Add a specified time offset to the selected range	Add time offset	Додати позначку часу
`function.addaltitudeoffset`	Add a specified altitude offset to the selected range	Add altitude offset	Додати позначку висоти
`function.findwaypoint`	Search for waypoints with given name	Find waypoint	Знайти шляхову точку
`function.rearrangewaypoints`	Rearrange the order of waypoints within the point series	Rearrange waypoints	Перевизначити інтервали
`function.convertnamestotimes`	Try to interpret waypoint names as timestamps	Convert waypoint names to times	Перетворити ім’я шляхової точки у час
`function.deletefieldvalues`	Delete the values of a specified field	Delete field values	Вилучити значення поля
`function.pastecoordinates`	Create new point by entering the coordinates	Enter point coordinates	Введення нових координат
`function.pastecoordinatelist`	Create a series of points by entering coordinates (like a text file)	Enter list of coordinates
`function.enterpluscode`	Enter pluscodes, also known as Open Location Codes	Enter pluscode
`function.charts`		Charts	Графіки
`function.show3d`	Show a new window with a 3d view of the data	Three-D view	3D-вигляд
`function.distances`	Show a list of distances between waypoints	Distances	Відстані
`function.viewfulldetails`	Show the additional point / range details like pace, gradient	Full details
`function.estimatetime`	Use typical speeds to estimate how long it would take to cover the current range	Estimate time	Приблизний час
`function.learnestimationparams`	Use the times in the current track to calculate how to estimate times	Learn time estimation parameters	Параметри вгадування приблизного часу
`function.autoplay`	Let GpsPrune scroll through the track for you	Autoplay track
`function.selectsegment`	Select the current segment	Select current segment	Вибрати поточний сегмент
`function.splitsegments`	Split the track into segments	Split track into segments	Розбити трек на сегменти
`function.sewsegments`	Shuffle and reverse the track segments as necessary to join them together	Sew track segments together	Зшити сегменти треків разом
`function.createmarkerwaypoints`	Create waypoints to mark distance or time intervals	Create marker waypoints
`function.lookupsrtm`	Lookup the point coordinates in SRTM data to find (approx) altitudes	Get altitudes from SRTM	Отримати висоти з SRTM
`function.configuresrtmsources`	Choose low-res SRTM or (after registration) higher-res SRTM	Configure SRTM sources
`function.getwikipedia`	Lookup wikipedia articles about places nearby	Get nearby Wikipedia articles	Отримати найближчу статтю з Вікіпедії
`function.searchwikipedianames`	Lookup Wikipedia articles by name	Search Wikipedia by name	Пошук статей з Вікіпедії за назвою
`function.searchosmpois`	Lookup OSM points nearby (eg bus stops, restaurants)	Get nearby OSM points
`function.searchopencachingde`	Search for geocaches near the current point	Search OpenCaching.de
`function.mapillary`	Search online for photos near the current point	Search for photos in Mapillary
`function.downloadosm`	Download the (large) OSM raw data file for the area covered by the current track	Download OSM data for area	Звантажити OSM-дані на територію
`function.truncatecoords`	Round coordinate values to given number of decimal places	Truncate coordinates
`function.duplicatepoint`	Copy the current point to the end of the track	Duplicate point	Копіювати точку в кінець треку
`function.projectpoint`	Project the current point with bearing and distance, to create a new point	Project point
`function.projectcircle`	Project the current point in all directions at the specified distance, to create a circle	Project circle around point
`function.connecttopoint`	Connect current photo (or audio clip) to current point	Connect to point	Прикріпити до точки
`function.disconnectfrompoint`	Disconnect photo (or audio clip) from point	Disconnect from point	Відкріпити від точки
`function.removephoto`	Remove photo from list, don't delete the file!	Remove photo	Вилучити світлину
`function.correlatephotos`	Correlate all photos using timestamps	Correlate photos	Зіставити світлини за часом
`function.rearrangephotos`	Rearrange photo points within the track	Rearrange photos	Впорядкувати світлини за треком
`function.rotatephotoleft`	Rotate current photo 90 degrees anticlockwise	Rotate photo left	Повернути світлину на 90° вліво
`function.rotatephotoright`	Rotate current photo 90 degrees clockwise	Rotate photo right	Повернути світлину на 90° вправо
`function.photopopup`	Open a new window showing the photo bigger	Show photo popup	Відкрити світлину в окремому вікні
`function.ignoreexifthumb`	Don't use the exif thumbnail, load the whole image	Ignore exif thumbnail	Звантажити повну світлину
`function.loadaudio`		Add audio clips	Додати звукозапис
`function.removeaudio`	Remove the current audio clip from the list	Remove audio clip	Вилучити звукозапис
`function.correlateaudios`	Correlate all audio clips using timestamps	Correlate audios	Зіставити звукозаписи за часом
`function.playaudio`		Play audio clip	Програти звукозапис
`function.stopaudio`	Stop playing the current audio clip	Stop audio clip	Зупинити звукозапис
`function.setmapbg`	Set the tile server for the background maps	Set map background	Вибрати мапу-підкладку
`function.setpaths`	Set the paths to the external programs like gpsbabel	Set program paths	Встановити шляхи до програм
`function.setcolours`	Specify the colours used for points, selections, backgrounds	Set colours	Встановити кольори
`function.setdisplaysettings`	Set options for map display, like how lines are drawn	Set display options
`function.setwaypointdisplay`	Set options for waypoint display, like icons and colours	Set waypoint options
`function.setlanguage`	Set the language to be used (requires restart)	Set language	Встановити мову
`function.help`	Show a help message	Help	Допомога
`function.showkeys`	Show a list of shortcut keys	Show shortcut keys	Показати гарячі клавіші
`function.about`	Show the "About" screen	About GpsPrune	Про GpsPrune
`function.checkversion`	Check if a new version of GpsPrune has been released	Check for new version	Перевірити оновлення
`function.saveconfig`	Save the configuration settings like directories, GPS device	Save settings	Зберегти налаштування
`function.diskcache`	Settings for disk caching of map images	Save maps to disk	Зберегти мапи на диск
`function.managetilecache`	Controls for deleting old map tiles	Manage tile cache	Управління кешем
`function.getweatherforecast`	Download a weather forecast for the current area	Get weather forecast
`function.setaltitudetolerance`	Set the altitude variation which is ignored for climb and descent values	Set altitude tolerance
`function.selecttimezone`	Set the timezone with which point timestamps are displayed	Set timezone

Dialogs

Id	Description	English	Ukrainian
`dialog.exit.confirm.title`		Exit GpsPrune	Вихід
`dialog.exit.unsaveddata.text`	User hasn't saved the data yet, check if ok to exit without saving	Your data is not saved. Are you sure you want to exit?	Дані не збережені! Продовжити?
`dialog.exit.unsavedsettings.text`	User hasn't saved the settings	It is recommended to call "Save settings" before exit. Exit anyway?
`dialog.openappend.title`		Append to existing data	Додати або відкрити замість відкритих.
`dialog.openappend.text`	Append means if I open file1 and then file2, I have both data together. If I say no, I remove file1 data and just have file2.	Append this data to the data already loaded?	Додати до поточних даних?
`dialog.deletepoint.title`		Delete Point	Вилучити точку
`dialog.deletepoint.deletephoto`	Question whether to remove photo from list or just disconnect from point	Delete photo attached to this point?	Вилучити світлину з цієї точки?
`dialog.deletephoto.title`		Delete Photo	Вилучити світлину
`dialog.deletephoto.deletepoint`	Question whether to delete the point attached to the photo being removed	Delete point attached to this photo?	Вилучити точку з цієї чвітлини?
`dialog.deleteaudio.deletepoint`	Same as above but for an audio clip being removed	Delete point attached to this audio clip?	Вилучити точку з цього звукозапису?
`dialog.openoptions.title`		Open options	Відкрити опції
`dialog.openoptions.filesnippet`	label for showing a small part of the file	Extract of file	Фрагмент файлу
`dialog.load.table.field`		Field	Поле
`dialog.load.table.datatype`		Data Type	Тип даних
`dialog.load.table.description`		Description	Опис
`dialog.delimiter.label`	The character which separates fields of data	Field delimiter	Роздільник полів
`dialog.delimiter.comma`		Comma ,	Кома ,
`dialog.delimiter.tab`		Tab	Табуляція
`dialog.delimiter.space`		Space	Пробіл
`dialog.delimiter.semicolon`		Semicolon ;	Крапка з комою ;
`dialog.delimiter.other`		Other	Інше
`dialog.openoptions.deliminfo.records`		records, with	запис, з
`dialog.openoptions.deliminfo.fields`	These two make the message "<number> records, with <number> fields" to describe what was found	fields	поле
`dialog.openoptions.deliminfo.norecords`		No records	Немає записів
`dialog.openoptions.altitudeunits`		Altitude units	Одиниці висот
`dialog.openoptions.speedunits`		Speed units	Одиниці швидкості
`dialog.openoptions.vertspeedunits`		Vertical speed units	Одиниці швидкості по вертикалі
`dialog.openoptions.vspeed.intro`	Optional description before the two radio buttons
`dialog.openoptions.vspeed.positiveup`	Radio buttons for meaning of positive vertical speed values	Positive speeds upwards	Позитивні швидкості вгору
`dialog.openoptions.vspeed.positivedown`		Positive speeds downwards	Позитивні швидкості вниз
`dialog.open.contentsdoubled`	Warning message shown when all points are given twice	This file contains two copies of each point.	Цей файл містить дублювання в кожній точці.
`dialog.open.contentsdoubled.wayandtrack`	Warning message shown when all points are given twice with waypoints and track points	This file contains two copies of each point,\nonce as waypoints and once as track points.	Цей файл містить дублювання в кожній точці, \nодна як шляхова точка і одна як трекова точка.
`dialog.selecttracks.intro`	Message for selecting tracks when loading a gpx file	Select the track or tracks to load	Виберіть трек(-и) для відкриття
`dialog.selecttracks.noname`	Displayed for tracks without a name	Unnamed	Безіменний
`dialog.jpegload.subdirectories`	Option to search through all subdirectories as well	Include subdirectories	Включити підтеки
`dialog.jpegload.loadjpegswithoutcoords`	Option to also load jpegs which don't have coordinates in them	Include photos without coordinates	Включити світлини без координат
`dialog.jpegload.loadjpegsoutsidearea`	Option to also load jpegs which are outside the current track area	Include photos outside current area	Включити світлини за межами поточної області
`dialog.jpegload.progress.title`		Loading photos	Завантаження світлин
`dialog.jpegload.progress`		Please wait while the photos are searched	Будь-ласка, зачекайте, йде пошук світлин
`dialog.gpsload.nogpsbabel`		No gpsbabel program could be found. Continue?	„gpsbabel“ не знайдено. Продовжити?
`dialog.gpsload.device`	parameter for gpsbabel, eg '/dev/ttyUSB0'	Device name	Ім’я пристрою
`dialog.gpsload.format`	parameter for gpsbabel, eg 'garmin'	Format	Формат
`dialog.gpsload.getwaypoints`		Load waypoints	Завантажити шляхові точки
`dialog.gpsload.gettracks`	Two checkboxes for what to load from GPS	Load tracks	Завантажити треки
`dialog.gpsload.save`	Checkbox to save GPS data immediately to file	Save to file	Зберегти до файлу
`dialog.gpssend.sendwaypoints`		Send waypoints	Вислати шляхові точки
`dialog.gpssend.sendtracks`	Two checkboxes for what to send to GPS	Send tracks	Вислати треки
`dialog.gpssend.trackname`	Name of track as it appears in GPS unit	Track name	Назва треку
`dialog.gpsbabel.filters`	Area of dialog dealing with GPSBabel filters	Filters	Фільтри
`dialog.addfilter.title`	Dialog title for adding a new GPSBabel filter	Add filter	Додати фільтр
`dialog.gpsbabel.filter.discard`	Four buttons for the types of GPSBabel filter	Discard	Відкинути
`dialog.gpsbabel.filter.simplify`		Simplify	Спростити
`dialog.gpsbabel.filter.distance`		Distance	Відстань
`dialog.gpsbabel.filter.interpolate`		Interpolate	Інтерполювати
`dialog.gpsbabel.filter.discard.intro`	Introduction to discard filter settings	Discard points if	Відкинути точки якщо
`dialog.gpsbabel.filter.discard.hdop`	Horizontal dilution of precision	Hdop >	ГорПогіршТочн >
`dialog.gpsbabel.filter.discard.vdop`	Vertical dilution of precision	Vdop >	ВертПогіршТочн >
`dialog.gpsbabel.filter.discard.numsats`	Number of satellites	Number of satellites <	Число супутників <
`dialog.gpsbabel.filter.discard.nofix`	Checkbox for discard filter	Point has no fix	Точка не має виправлення
`dialog.gpsbabel.filter.discard.unknownfix`	Checkbox for discard filter	Point has unknown fix	Точка має невідоме виправлення
`dialog.gpsbabel.filter.simplify.intro`	Introduction to simplify filter settings	Remove points until	Вилучити точки до
`dialog.gpsbabel.filter.simplify.maxpoints`	Label before max points box	Number of points <	Кількість точок <
`dialog.gpsbabel.filter.simplify.maxerror`	Label before max error box	or error distance <	або помилка відстані <
`dialog.gpsbabel.filter.simplify.crosstrack`	Three radio buttons for error type	cross-track	перехрещення треків
`dialog.gpsbabel.filter.simplify.length`		length difference	різниця в довжині
`dialog.gpsbabel.filter.simplify.relative`		relative to hdop	відносно ГорПогіршТочн
`dialog.gpsbabel.filter.distance.intro`	Introduction to distance filter settings	Remove points if close to any previous point	Вилучити точки, якщо близько до будь-якої попередньої точки
`dialog.gpsbabel.filter.distance.distance`	Label before distance box	If distance <	Якщо відстань <
`dialog.gpsbabel.filter.distance.time`	Label before time limit box	and time difference <	і різниця в часі <
`dialog.gpsbabel.filter.interpolate.intro`	Introduction to interpolate settings	Add extra points between track points	Додати додаткові точки між точок на треку
`dialog.gpsbabel.filter.interpolate.distance`	Label before distance box	If distance >	Якщо відстань >
`dialog.gpsbabel.filter.interpolate.time`	Label before time box	or time difference >	або різниця в часі >
`dialog.saveoptions.title`		Save file	Зберегти файл
`dialog.save.fieldstosave`	Label for the table of which fields to save to the file	Fields to save	Поля для збереження
`dialog.save.table.field`		Field	Поле
`dialog.save.table.hasdata`	A checkbox which is checked if the field has data in it	Has data	Має дату
`dialog.save.table.save`		Save	Зберегти
`dialog.save.headerrow`	A checkbox which can be checked to also save a header row	Output header row	Заголовок рядка
`dialog.save.coordinateunits`		Coordinate format	Одиниці координат
`dialog.save.altitudeunits`		Altitude units	Одиниці висоти
`dialog.save.timestampformat`		Timestamp format	Формат часу
`dialog.save.overwrite.title`		File already exists	Файл вже існує
`dialog.save.overwrite.text`		This file already exists. Are you sure you want to overwrite the file?	Файл вже існує. Ви впевнені, що хочете його перезаписати?
`dialog.save.notypesselected`	At least one of the three point types (track, way, photo) should be selected for any save/export	No point types have been selected	Не вибрано тип точок
`dialog.exportkml.text`	Title text saved to file	Title for the data	опис до даних
`dialog.exportkml.altitude`	altitudes are always included in KML but this checkbox specifies "absolute", not "clampToGround"	Absolute altitudes (for aviation)	Абсолютні висоти (для авіації)
`dialog.exportkml.kmz`	Checkbox for export to kmz or kml	Compress to make kmz file	Стиснення для kmz-файлу
`dialog.exportkml.exportimages`	Checkbox to also save thumbnails of photos	Export image thumbnails to kmz	Експорт ескізу в kmz
`dialog.exportkml.imagesize`	Size of the image thumbnails in the KMZ (pixels)	Image size
`dialog.exportkml.trackcolour`	Label for colour patch for selecting colour of track	Track colour	Колір треку
`dialog.exportkml.standardkml`	Two radio buttons - this one is plain KML as before, without timestamps	Standard KML
`dialog.exportkml.extendedkml`	Second radio button - this one uses Google's extensions to KML allowing timestamps (if present)	Extended KML with timestamps
`dialog.exportgpx.name`		Name
`dialog.exportgpx.desc`		Description
`dialog.exportgpx.includetimestamps`	Checkbox to include timestamps in GPX file	Include timestamps
`dialog.exportgpx.copysource`	Checkbox to copy loaded xml if possible	Copy source xml
`dialog.exportgpx.encoding`	Panel for selecting character encoding	Encoding
`dialog.exportgpx.encoding.system`	The default system encoding	System
`dialog.exportgpx.encoding.utf8`	Radio button to use UTF-8, ignoring system settings	UTF-8
`dialog.exportpov.text`		Please enter the parameters for the POV export
`dialog.exportpov.font`		Font
`dialog.exportpov.camerax`	X coordinate of camera	Camera X
`dialog.exportpov.cameray`	Y coordinate of camera	Camera Y
`dialog.exportpov.cameraz`	Z coordinate of camera	Camera Z
`dialog.exportpov.modelstyle`	Style of model to use	Model style
`dialog.exportpov.ballsandsticks`	'old method' where each point is a ball on a stick	Balls and sticks
`dialog.exportpov.tubesandwalls`	'new method' where the track looks like a tube of toothpaste	Tubes and walls
`dialog.3d.warningtracksize`	Warning about large track size, asking whether to continue or not	This track has a large number of points, which Java3D might not be able to display.\nAre you sure you want to continue?
`dialog.3d.useterrain`	Checkbox for drawing a 3d terrain or not	Show terrain
`dialog.3d.terraingridsize`	Edit box for entering the number of points to use in the terrain grid	Grid size
`dialog.exportpov.baseimage`	Label for image used on the base plane of the pov export	Base image
`dialog.exportpov.cannotmakebaseimage`	Error if base image can't be saved for some reason	Cannot write base image
`dialog.baseimage.title`	Title of popup window	Map image
`dialog.baseimage.useimage`	Checkbox for using an image or not	Use image
`dialog.baseimage.mapsource`		Map source
`dialog.baseimage.zoom`		Zoom level
`dialog.baseimage.tiles`	Number of tiles used and total (like 7 / 7)	Tiles
`dialog.baseimage.size`	Width and height of image in pixels	Image size
`dialog.exportimage.noimagepossible`	Error if disk cache isn't being used	Map images need to be cached to disk in order to use them for an export.
`dialog.exportimage.drawtrack`	Checkbox to draw the track on top of the exported map image	Draw track on map
`dialog.exportimage.drawtrackpoints`	Checkbox to also draw each track point or just the lines between	Draw track points
`dialog.exportimage.textscalepercent`	Percentage scale factor for the font size (100 means normal font size)	Text scale factor (%)
`dialog.pointtype.desc`	Describe the meaning of these checkboxes	Save the following point types:
`dialog.pointtype.track`	Save track points	Track points
`dialog.pointtype.waypoint`	Save waypoints	Waypoints
`dialog.pointtype.photo`	Save photo points	Photo points
`dialog.pointtype.audio`	Save points with audio clips attached	Audio points
`dialog.pointtype.selection`	Checkbox to just save the currently selected range	Just selection
`dialog.confirmreversetrack.title`	Title of dialog to confirm whether to really do a section reversal or not	Confirm reversal
`dialog.confirmreversetrack.text`	This message just makes sure it is ok to do a reversal even though the data contains timestamps. Assuming that the timestamps are in time order, doing a reversal will put the timestamps out of sequence.	This track contains timestamp information, which will be out of sequence after a reversal.\nAre you sure you want to reverse this section?
`dialog.confirmcutandmove.title`		Confirm cut and move
`dialog.confirmcutandmove.text`	Same as above but for moving a track section	This track contains timestamp information, which will be out of sequence after a move.\nAre you sure you want to move this section?
`dialog.interpolate.parameter.text`	Number of points to insert between each pair of points in the selected range	Number of points to insert between each pair of points
`dialog.interpolate.betweenwaypoints`	Question whether to create new track points between each pair of waypoints	Interpolate between waypoints?
`dialog.undo.title`		Undo action(s)
`dialog.undo.pretext`		Please select the action(s) to undo
`dialog.undo.none.title`		Cannot undo
`dialog.undo.none.text`		No operations to undo!
`dialog.clearundo.title`		Clear undo list
`dialog.clearundo.text`		Are you sure you want to clear the undo list?\nAll undo information will be lost!
`dialog.pointedit.title`		Edit point
`dialog.pointedit.intro`	Description at the top of the edit point dialog	Select each field in turn to view and change the value
`dialog.pointedit.table.field`		Field
`dialog.pointedit.nofield`	for label on right-hand side of point edit dialog	No field selected
`dialog.pointedit.table.value`		Value
`dialog.pointnameedit.name`		Waypoint name
`dialog.pointnameedit.uppercase`		UPPER case
`dialog.pointnameedit.lowercase`		lower case
`dialog.pointnameedit.titlecase`	capitalise each word of the name	Title Case
`dialog.truncatecoords.intro`	Description for truncate coordinates dialog	Select the coordinate format and the number of decimal digits
`dialog.truncatecoords.numdigits`	How many digits after the decimal point	Number of decimal digits
`dialog.truncatecoords.preview`	How the results would look if truncated	Preview
`dialog.addtimeoffset.add`	Make points later	Add time
`dialog.addtimeoffset.subtract`	Make points earlier	Subtract time
`dialog.addtimeoffset.weeks`		Weeks
`dialog.addtimeoffset.days`		Days
`dialog.addtimeoffset.hours`		Hours
`dialog.addtimeoffset.minutes`		Minutes
`dialog.addtimeoffset.notimestamps`	Error message shown when no points with timestamps are selected	Cannot add a time offset as this selection doesn't contain any timestamp information
`dialog.findwaypoint.intro`	Introductory text for find waypoint dialog	Enter part of the waypoint name
`dialog.findwaypoint.search`	Label for search box	Search
`dialog.saveexif.title`	Title for save exif dialog	Save Exif
`dialog.saveexif.intro`		Select the photos to save using the checkboxes
`dialog.saveexif.nothingtosave`	Message when nothing to do	Coordinate data is unchanged, nothing to save
`dialog.saveexif.noexiftool`	Message when exiftool not found	No exiftool program could be found. Continue?
`dialog.saveexif.table.photoname`		Photo name
`dialog.saveexif.table.status`	Column heading for status (see values below)	Status
`dialog.saveexif.table.save`	Column heading for save checkbox	Save
`dialog.saveexif.photostatus.connected`	Photo had no point, now it has	Connected
`dialog.saveexif.photostatus.disconnected`	Photo did have a point, now it doesn't	Disconnected
`dialog.saveexif.photostatus.modified`	Photo did have a point but it's been edited	Modified
`dialog.saveexif.overwrite`	Check to overwrite jpg files	Overwrite files
`dialog.saveexif.force`	Add flag to ignore minor errors and force exif write	Force despite minor errors
`dialog.charts.xaxis`	Panel to choose x axis for charts	X axis
`dialog.charts.yaxis`	Panel to choose y axes for charts	Y axes
`dialog.charts.output`	Panel to choose where to output to	Output
`dialog.charts.screen`		Output to screen
`dialog.charts.svg`		Output to SVG file
`dialog.charts.svgwidth`	width and height of SVG file in pixels	SVG width
`dialog.charts.svgheight`		SVG height
`dialog.charts.needaltitudeortimes`	Without altitudes and without times, can't draw any charts	The track must have either altitudes or time information in order to create charts
`dialog.charts.gnuplotnotfound`	Error message shown when gnuplot path changed but still not found	Could not find gnuplot with the given path
`dialog.distances.intro`		Straight line distances between points
`dialog.distances.column.from`	Column heading for distances dialog	From point
`dialog.distances.column.to`		To point
`dialog.distances.currentpoint`	Table entry for current track point	Current point
`dialog.distances.toofewpoints`	Message shown when less than two waypoints available	This function needs waypoints in order to calculate the distances between them
`dialog.fullrangedetails.intro`	Message at top of "full range details" dialog	Here are the details for the selected range
`dialog.fullrangedetails.coltotal`	Column heading for total values	Including gaps
`dialog.fullrangedetails.colsegments`	Column heading when gaps between segments are ignored	Without gaps
`dialog.estimatetime.details`	Heading for the details section of estimating time	Details
`dialog.estimatetime.gentle`	Column heading for low/shallow gradient	Gentle
`dialog.estimatetime.steep`	Column heading for steep/high gradient	Steep
`dialog.estimatetime.climb`		Climb
`dialog.estimatetime.descent`		Descent
`dialog.estimatetime.parameters`	Heading for parameters section	Parameters
`dialog.estimatetime.parameters.timefor`	Minutes required for travelling a specified distance	Time for
`dialog.estimatetime.results`	Heading for results section	Results
`dialog.estimatetime.results.estimatedtime`	Results of calculation in hours, mins and secs	Estimated time
`dialog.estimatetime.results.actualtime`	Actual required time according to the timestamps	Actual time
`dialog.estimatetime.error.nodistance`	Error shown if current selection only has waypoints or singletons, so moving distance is zero	The time estimates need connected track points, to give a distance
`dialog.estimatetime.error.noaltitudes`	Warning shown if the current selection hasn't got any altitude information	The selection doesn't include any altitude information
`dialog.learnestimationparams.intro`	Label before the results of the parameter-learning	These are the parameters calculated from this track
`dialog.learnestimationparams.averageerror`	Label for the average percentage error generated by these parameters	Average error
`dialog.learnestimationparams.combine`	Label between the calculated results and the combined results	These parameters can be combined with the current values
`dialog.learnestimationparams.combinedresults`	Heading for combined results section	Combined results
`dialog.learnestimationparams.weight.100pccurrent`	Slider all the way to the left	Keep current values
`dialog.learnestimationparams.weight.current`	used to build the strings eg 60% current + 40% calculated	current
`dialog.learnestimationparams.weight.calculated`	used to build the strings eg 60% current + 40% calculated	calculated
`dialog.learnestimationparams.weight.50pc`	Average of current values and calculated ones	Average of current values and calculated ones
`dialog.learnestimationparams.weight.100pccalculated`	Slider all the way to the right	Use new calculated values
`dialog.setmapbg.intro`	Label at top of map background dialog	Select one of the map sources, or add a new one
`dialog.addmapsource.title`	Title of dialog to add a new map source	Add new map source
`dialog.addmapsource.sourcename`	Label for source name	Name of source
`dialog.addmapsource.layer1url`	Label for text box for URL	URL of first layer
`dialog.addmapsource.layer2url`	Label for text box for URL	Optional URL of second layer
`dialog.addmapsource.maxzoom`	Label for dropdown to select maximum zoom level	Maximum zoom level
`dialog.addmapsource.noname`	Name given to new map source if no name entered	Unnamed
`dialog.gpsies.column.name`	Column headings for table in gpsies dialog	Track name
`dialog.gpsies.column.length`		Length
`dialog.gpsies.description`	Heading for description box	Description
`dialog.gpsies.nodescription`	Message displayed when no description found	No description
`dialog.gpsies.nonefound`	Message when no tracks returned from search	No tracks found
`dialog.mapillary.nonefound`	Message when no photos found by Mapillary search	No photos found
`dialog.wikipedia.column.name`	Column heading: page name in Wikipedia	Article name
`dialog.wikipedia.column.distance`	Column heading: distance of each point from the centre of view	Distance
`dialog.wikipedia.nonefound`	Message when no points returned from wikipedia	No wikipedia entries found
`dialog.osmpois.column.name`	Column heading: point name	Name
`dialog.osmpois.column.type`	Column heading: point type	Type
`dialog.osmpois.nonefound`	Message when no points returned from OSM	No points found
`dialog.geocaching.nonefound`	Message when no points returned from opencaching.de	No geocaches found
`dialog.correlate.notimestamps`	Message when no timestamp information in points	There are no timestamps in the data points, so there is nothing to correlate with the photos.
`dialog.correlate.nouncorrelatedphotos`	Message when all photos are already correlated	There are no uncorrelated photos.\nAre you sure you want to continue?
`dialog.correlate.nouncorrelatedaudios`	Message when all audio clips are already correlated	There are no uncorrelated audios.\nAre you sure you want to continue?
`dialog.correlate.photoselect.intro`	Heading above table in first correlate panel	Select one of these correlated photos to use as the time offset
`dialog.correlate.select.photoname`		Photo name
`dialog.correlate.select.timediff`		Time difference
`dialog.correlate.select.photolater`	Is the photo time later than the point time?	Photo later
`dialog.correlate.options.intro`	Heading above table in second correlate panel	Select the options for automatic correlation
`dialog.correlate.options.offsetpanel`	Panel title	Time offset
`dialog.correlate.options.offset`	Heading for time offset boxes	Offset
`dialog.correlate.options.offset.hours`	three fields for describing text boxes of offset	hours,
`dialog.correlate.options.offset.minutes`		minutes and
`dialog.correlate.options.offset.seconds`		seconds
`dialog.correlate.options.photolater`	radio button for direction of time difference	Photo later than point
`dialog.correlate.options.pointlaterphoto`	radio button	Point later than photo
`dialog.correlate.options.audiolater`	radio button	Audio later than point
`dialog.correlate.options.pointlateraudio`	radio button	Point later than audio
`dialog.correlate.options.limitspanel`		Correlation limits
`dialog.correlate.options.notimelimit`	radio button	No time limit
`dialog.correlate.options.timelimit`	radio button	Time limit
`dialog.correlate.options.nodistancelimit`	radio button	No distance limit
`dialog.correlate.options.distancelimit`	radio button	Distance limit
`dialog.correlate.options.correlate`	Table column heading	Correlate
`dialog.correlate.alloutsiderange`	Message shown when all photos are outside time range of track	All the items are outside the time range of the track, so none can be correlated.\nTry changing the offset or manually correlating at least one item.
`dialog.correlate.filetimes`	First half of explanation message	File timestamps denote:
`dialog.correlate.filetimes2`	Second half of text after the three radio buttons	of audio clip
`dialog.correlate.correltimes`	Explanation of three following radio buttons	For correlation, use:
`dialog.correlate.timestamp.beginning`		Beginning
`dialog.correlate.timestamp.middle`		Middle
`dialog.correlate.timestamp.end`		End
`dialog.correlate.audioselect.intro`	Introduction text to first panel of audio correlation	Select one of these correlated audios to use as the time offset
`dialog.correlate.select.audioname`	Table column heading for audio clipname	Audio name
`dialog.correlate.select.audiolater`	Table column heading	Audio later
`dialog.rearrangewaypoints.desc`	Message for the top of the rearrange waypoints dialog	Select the destination and sort order of the waypoints
`dialog.rearrangephotos.desc`	Message for the top of the rearrange photos dialog	Select the destination and sort order of the photo points
`dialog.rearrange.tostart`		Move to start	Усе на початок файлу
`dialog.rearrange.toend`		Move to end	Усе на кінець файлу
`dialog.rearrange.tonearest`		Each to nearest track point	Перемістити до найближчої
`dialog.rearrange.nosort`	Leave points/photos in current order	Don't sort
`dialog.rearrange.sortbyfilename`	Sort by filename of photo	Sort by filename
`dialog.rearrange.sortbyname`	Sort by waypoint name	Sort by name
`dialog.rearrange.sortbytime`		Sort by time
`dialog.compress.duplicates.title`	checkbox for turning on duplicate removal	Duplicate removal
`dialog.compress.closepoints.title`	checkbox for turning on removal of points close to other ones	Nearby point removal
`dialog.compress.closepoints.paramdesc`	parameter for close point removal	Span factor
`dialog.compress.wackypoints.title`	checkbox for turning on removal of "wacky" or unusual points	Wacky point removal
`dialog.compress.wackypoints.paramdesc`	parameter for wacky point removal	Distance factor
`dialog.compress.singletons.title`	checkbox for turning on removal of singletons	Singleton removal
`dialog.compress.singletons.paramdesc`	parameter for singleton removal	Distance factor
`dialog.compress.douglaspeucker.title`		Douglas-Peucker compression
`dialog.compress.douglaspeucker.paramdesc`		Span factor
`dialog.compress.summarylabel`	label to say how many will be deleted	Points to delete
`dialog.compress.confirm`	Makes a message "<number of points> have been marked" and asks whether to delete them now	%d points have been marked.\nDelete these marked points now?
`dialog.compress.confirmnone`		no points have been marked
`dialog.deletemarked.nonefound`	warning message for delete marked points when no points are marked	No data points could be removed
`dialog.pastecoordinates.desc`		Enter or paste the coordinates here
`dialog.pastecoordinates.coords`	Label for coordinates entry box	Coordinates
`dialog.pastecoordinates.nothingfound`	Error message when coordinates couldn't be parsed	Please check the coordinates and try again
`dialog.pastecoordinatelist.desc`		Enter the coordinates for the new points with one point per line
`dialog.pluscode.desc`	Explanation	Enter or paste the pluscode here
`dialog.pluscode.code`	Label for code entry box	Pluscode
`dialog.pluscode.nothingfound`	Error message when code couldn't be parsed	Please check the code and try again
`dialog.help.help`	Popup message to direct to website	Please see\n https://gpsprune.activityworkshop.net/\nfor more information and tips,\nincluding a PDF user guide you can buy.
`dialog.about.version`		Version
`dialog.about.build`		Build
`dialog.about.summarytext1`		GpsPrune is a program for loading, displaying and editing data from GPS receivers.
`dialog.about.summarytext2`		It is released under the Gnu GPL for free, open, worldwide use and enhancement.<br>Copying, redistribution and modification are permitted and encouraged<br>according to the conditions in the included <code>license.txt</code> file.
`dialog.about.summarytext3`		Please see <code style="font-weight:bold">https://activityworkshop.net/</code> for more information and tips, including<br>a PDF user guide you can buy.
`dialog.about.languages`	languages available in GpsPrune	Available languages
`dialog.about.translatedby`	Name or nickname of translator for this language	English text by activityworkshop.
`dialog.about.systeminfo`	Tab heading for system information	System info
`dialog.about.systeminfo.os`		Operating System
`dialog.about.systeminfo.java`	Version of java	Java Runtime
`dialog.about.systeminfo.java3d`		Java3d installed
`dialog.about.systeminfo.exiftool`		Exiftool installed
`dialog.about.systeminfo.gpsbabel`		Gpsbabel installed
`dialog.about.systeminfo.gnuplot`		Gnuplot installed
`dialog.about.yes`	Shown when item installed	Yes	Так
`dialog.about.no`	Shown when item not available	No	Ні
`dialog.about.credits`	Tab heading for credits (acknowledgements)	Credits
`dialog.about.credits.code`		GpsPrune code written by
`dialog.about.credits.exifcode`		Exif code by
`dialog.about.credits.icons`		Some icons taken from
`dialog.about.credits.translators`	Who did the translations	Translators
`dialog.about.credits.translations`		Translations helped by
`dialog.about.credits.devtools`		Development tools
`dialog.about.credits.othertools`		Other tools
`dialog.about.credits.thanks`		Thanks to
`dialog.about.readme`	Tab for readme file	Readme
`dialog.checkversion.error`	Error message when file couldn't be found, or online connection not available	The version number couldn't be checked.\nPlease check the internet connection.
`dialog.checkversion.uptodate`	Shown when this is already the latest version	You are using the latest version of GpsPrune.
`dialog.checkversion.newversion1`		A new version of GpsPrune is now available! The latest version is now version
`dialog.checkversion.newversion2`	These two make the message to say that a new version <number> is now released	.
`dialog.checkversion.releasedate1`		This new version was released on
`dialog.checkversion.releasedate2`	These two make the messsage that the new one was released on <date>.	.
`dialog.checkversion.download`	Where to download the newest version.	To download the new version, go to https://gpsprune.activityworkshop.net/download.html.
`dialog.keys.intro`	Explanation of key shortcuts	You can use the following shortcut keys instead of using the mouse
`dialog.keys.keylist`	HTML table showing key shortcuts	<table><tr><td>Arrow keys</td><td>Pan map left right, up, down</td></tr><tr><td>Ctrl + left, right arrow</td><td>Select previous or next point</td></tr><tr><td>Ctrl + up, down arrow</td><td>Zoom in or out</td></tr><tr><td>Ctrl + PgUp, PgDown</td><td>Select previous, next segment</td></tr><tr><td>Ctrl + Home, End</td><td>Select first, last point</td></tr><tr><td>Del</td><td>Delete current point</td></tr></table>
`dialog.keys.normalmodifier`	Modifier text for linux, windows etc	Ctrl
`dialog.keys.macmodifier`	Modifier text for mac (to replace text in keylist)	Command
`dialog.paths.prune.gnuplotpath`		Path to gnuplot
`dialog.paths.prune.gpsbabelpath`		Path to gpsbabel
`dialog.paths.prune.exiftoolpath`		Path to exiftool
`dialog.setpaths.intro`	Introductory text for set program paths dialog	If you need to, you can choose the paths to the external applications:
`dialog.setpaths.found`	Column heading for yes/no	Path found?
`dialog.addaltitude.noaltitudes`	Warning if altitude offset can't be added	The selected range does not contain altitudes
`dialog.addaltitude.desc`	Label for edit box	Altitude offset to add
`dialog.lookupsrtm.overwritezeros`	Question whether to lookup altitudes for zero-valued altitudes as well as missing ones	Overwrite altitude values of zero?
`dialog.setcolours.intro`	Description of what to do with the set colours dialog	Click on a colour patch to change the colour
`dialog.setcolours.background`		Background
`dialog.setcolours.borders`		Borders
`dialog.setcolours.lines`		Lines
`dialog.setcolours.primary`		Primary
`dialog.setcolours.secondary`		Secondary
`dialog.setcolours.point`		Points
`dialog.setcolours.selection`		Selection
`dialog.setcolours.text`		Text
`dialog.colourchooser.title`	Dialog title for choosing a single colour	Choose colour
`dialog.colourchooser.red`	Label for red value	Red
`dialog.colourchooser.green`	Label for green value	Green
`dialog.colourchooser.blue`	Label for blue value	Blue
`dialog.colourer.intro`	Heading for the point colourer section	A point colourer can give track points different colours
`dialog.colourer.type`	Label before type dropdown	Colourer type
`dialog.colourer.type.none`	Labels for different colourer types	None
`dialog.colourer.type.byfile`	Different colour for each file	By file
`dialog.colourer.type.bysegment`	Different colour for each track segment	By segment
`dialog.colourer.type.byaltitude`	Continuous colour according to altitude	By altitude
`dialog.colourer.type.byspeed`	Continuous colour according to speed	By speed
`dialog.colourer.type.byvertspeed`	Continuous colour according to vertical speed	By vertical speed
`dialog.colourer.type.bygradient`	Continuous colour according to gradient	By gradient
`dialog.colourer.type.bydate`	Different colour for each date	By date
`dialog.colourer.start`	Label above start colour patch	Start colour
`dialog.colourer.end`	Label above end colour patch	End colour
`dialog.colourer.maxcolours`		Maximum number of colours
`dialog.setlanguage.firstintro`	First label on dialog - use <p> for line break	You can either select one of the included languages,<p>or select a text file to use instead.
`dialog.setlanguage.secondintro`	Second label on dialog	You need to save your settings and then<p>restart GpsPrune to change the language.
`dialog.setlanguage.language`	label before language dropdown	Language
`dialog.setlanguage.languagefile`	label before text box for file path	Language file
`dialog.setlanguage.endmessage`	Message which pops up after changing language	Now save your settings and restart GpsPrune\nfor the language change to take effect.
`dialog.setlanguage.endmessagewithautosave`	Message which pops up after changing language if settings are autosaved	Please restart GpsPrune for the language change to take effect.
`dialog.diskcache.save`	Checkbox for enabling / disabling disk cache	Save map images to disk
`dialog.diskcache.dir`	Label for directory entry	Cache directory
`dialog.diskcache.createdir`	Prompt to confirm whether to create specified directory or not	Create directory
`dialog.diskcache.nocreate`	Message when directory not created (either user pressed cancel or create failed)	Cache directory not created
`dialog.diskcache.cannotwrite`	Selected directory is read-only	Map tiles cannot be saved in the selected directory
`dialog.diskcache.table.path`	Table column heading for relative file path	Path
`dialog.diskcache.table.usedby`	Which backgrounds use this tileset	Used by
`dialog.diskcache.table.zoom`	Zoom range covered	Zoom
`dialog.diskcache.table.tiles`	Number of tiles found	Tiles
`dialog.diskcache.table.megabytes`	Number of megabytes used by all tiles	Megabytes
`dialog.diskcache.tileset`	Path to tileset	Tileset
`dialog.diskcache.tileset.multiple`	shown when more than one tileset selected, instead of all the paths	multiple
`dialog.diskcache.deleteold`	radio button to delete files by age	Delete old tiles
`dialog.diskcache.maximumage`	label for the maximum age of tiles before they're deleted	Maximum age (days)
`dialog.diskcache.deleteall`	radio button to delete all files in the tileset	Delete all tiles
`dialog.diskcache.deleted`	Makes the message "Deleted <number> of tiles from the cache"	Deleted %d files from the cache
`dialog.deletefieldvalues.intro`	Label at the top of the delete field values dialog	Select the field to delete for the current range
`dialog.deletefieldvalues.nofields`	Message when there are no fields to delete	There are no fields to delete for this range
`dialog.displaysettings.linewidth`	Label for setting line thickness in pixels	Thickness of lines for the tracks (1-4)
`dialog.displaysettings.antialias`	Use antialiasing when drawing	Use antialiasing
`dialog.displaysettings.allowosscaling`	Allow OS to scale maps (makes them bigger but less sharp)	Allow OS to scale maps
`dialog.displaysettings.waypointicons`	Label for selecting which waypoint icon to use	Waypoint icons
`dialog.displaysettings.wpicon.default`	Label for default waypoint rendering, little square	Default
`dialog.displaysettings.wpicon.ringpt`	Circular marker with a pin at the bottom	Round marker
`dialog.displaysettings.wpicon.plectrum`	Egg-shaped marker with the pointy bit at the bottom	Plectrum
`dialog.displaysettings.wpicon.ring`	Circular ring around the point	Ring
`dialog.displaysettings.wpicon.pin`	Push pin / thumb tack	Board pin
`dialog.displaysettings.size.small`	Three radio buttons to select size of waypoint icons	Small
`dialog.displaysettings.size.medium`		Medium
`dialog.displaysettings.size.large`		Large
`dialog.waypointsettings.usecolours`	Checkbox for whether to use coloured waypoint icons or not	Colour by type
`dialog.waypointsettings.saltvalue`	Label describing which seed value to use (0 - 9)	Colour set
`dialog.waypointsettings.notypesintrack`	Warning shown if track doesn't contain any waypoint types	The current track doesn't contain any waypoint types.
`dialog.displaysettings.windowstyle`	Which of the available "look-and-feel"s to use	Window style (requires restart)
`dialog.displaysettings.windowstyle.default`	Normal style as before	Default
`dialog.displaysettings.windowstyle.nimbus`		Nimbus
`dialog.displaysettings.windowstyle.gtk`	May not be available everywhere	GTK
`dialog.downloadosm.desc`	Description at top of download OSM data dialog	Confirm to download the raw OSM data for the specified area:
`dialog.searchwikipedianames.search`	Search box	Search for:
`dialog.weather.location`	Where the weather forecast is for	Location
`dialog.weather.update`	When the forecast was last updated	Forecast updated
`dialog.weather.sunrise`	Time of sunrise	Sunrise
`dialog.weather.sunset`	Time of sunset	Sunset
`dialog.weather.temperatureunits`	Units for the temperatures (Celsius or Fahrenheit)	Temperatures
`dialog.weather.currentforecast`	Get the current weather	Current weather
`dialog.weather.dailyforecast`	Get one forecast for each day	Daily forecast
`dialog.weather.3hourlyforecast`	Get a forecast for each 3 hours	Three-hourly forecast
`dialog.weather.day.now`		Current weather
`dialog.weather.day.today`	Days for showing in the weather table	Today
`dialog.weather.day.tomorrow`		Tomorrow
`dialog.weather.day.monday`		Monday
`dialog.weather.day.tuesday`		Tuesday
`dialog.weather.day.wednesday`		Wednesday
`dialog.weather.day.thursday`		Thursday
`dialog.weather.day.friday`		Friday
`dialog.weather.day.saturday`		Saturday
`dialog.weather.day.sunday`		Sunday
`dialog.weather.wind`		Wind
`dialog.weather.temp`	Maybe should be shortened to fit in the forecast table	Temp
`dialog.weather.humidity`		Humidity
`dialog.weather.creditnotice`	Thanks to openweathermap.org	This data is made available by openweathermap.org. Their website has more details.
`dialog.deletebydate.onlyonedate`	Can't delete by date if there's only one date	The points were all recorded on the same date.
`dialog.deletebydate.intro`	Explanation at top of delete by date dialog	For each date in the track, you can choose to delete or keep the points
`dialog.deletebydate.nodate`	Table entry for points without a date	No timestamp
`dialog.deletebydate.column.keep`	Column heading in table - radio button for DON'T delete	Keep
`dialog.deletebydate.column.delete`	Same but for radio button to DELETE these points (see button.delete)	Delete
`dialog.setaltitudetolerance.text.metres`	Label to describe input parameter to tolerance (using metres for altitudes)	Limit (in metres) below which small climbs and descents will be ignored
`dialog.setaltitudetolerance.text.feet`	Label to describe input parameter to tolerance (using feet for altitudes)	Limit (in feet) below which small climbs and descents will be ignored
`dialog.settimezone.intro`	Label at top of timezone dialog	Here you can select the timezone in which to display point timestamps
`dialog.settimezone.system`	Radio button to use default	Use system timezone
`dialog.settimezone.custom`	Radio button to select a different timezone	Use the following timezone:
`dialog.settimezone.list.toomany`	Shown in list when too many options are found	Too many to choose
`dialog.settimezone.selectedzone`	Confirmation which timezone was selected	Selected timezone
`dialog.settimezone.offsetfromutc`	How many hours +/- this timezone is from UTC	Offset from UTC
`dialog.autoplay.duration`	Label at top of autoplay dialog specifying how long to play for	Duration (secs)
`dialog.autoplay.usetimestamps`	Checkbox for whether to play using the recorded times or just scroll through points	Use point timestamps
`dialog.autoplay.rewind`	Tooltip for rewind button	Back to beginning
`dialog.autoplay.pause`	Tooltip for pause button	Pause
`dialog.autoplay.play`	Tooltip for play button	Play
`dialog.markers.halves`	Radio button for creating marker waypoints at half distance etc	Halfway points
`dialog.markers.half.distance`	Name of created waypoint	Half distance
`dialog.markers.half.climb`	Name of created waypoint	Half climb
`dialog.markers.half.descent`	Name of created waypoint	Half descent
`dialog.projectpoint.desc`	Intro to point projection dialog	Enter the direction and distance to project this point
`dialog.projectpoint.bearing`	Angle clockwise from North	Bearing (degrees from N)
`dialog.projectcircle.desc`	Intro to circle projection dialog	Enter the distance from this point to the surrounding circle
`dialog.configuresrtm.intro1`	Intro to SRTM configuration dialog (line 1)	Altitudes from SRTM can come either from the low-resolution data without login,
`dialog.configuresrtm.intro2`	second line continuing the previous introduction message	or by registering at NASA for high-resolution data
`dialog.configuresrtm.threesecond`	Checkbox for 3-second data	Low resolution data (three arc seconds)
`dialog.configuresrtm.threesecond.desc`	Description of this 3-second data (no login required)	Low resolution data is always enabled without registration or login
`dialog.configuresrtm.onesecond`	Checkbox for 1-second data	High resolution data (one arc second)
`dialog.configuresrtm.onesecond.desc1`	Description of this 1-second data (login required)	High resolution data requires registration and login to NASA Earthdata.
`dialog.configuresrtm.onesecond.desc2`	second line continuing the previous description message	Create an account at https://urs.earthdata.nasa.gov/users/new
`dialog.configuresrtm.showregistrationwebsite`	Question whether to launch browser to register at NASA or not	Go now to NASA website for registration?
`dialog.configuresrtm.userid`	Prompt for registered username	Username registered at NASA Earthdata
`dialog.configuresrtm.password`	Prompt for registered password	Password registered at NASA Earthdata
`dialog.configuresrtm.loginfailed`	Error message shown when login using username / password failed	Username and password were rejected by the Earthdata server

3d window

Id	Description	English
`dialog.3d.title`	Window title	GpsPrune Three-d view
`dialog.3d.altitudefactor`		Altitude exaggeration factor
`dialog.3d.symbolscalefactor`	Scale factor used for spheres and cylinders (normally 1.0)	Shape scale factor

Confirm messages

Id	Description	English
`confirm.loadfile`	Confirm data loaded from file	Data loaded from file
`confirm.save.ok1`		Successfully saved
`confirm.save.ok2`	These two make the message "Successfully saved <number> points to file <filename>"	points to file
`confirm.deletepoint.single`	message for single point deleted	data point was removed
`confirm.deletepoint.multi`	message for more than one point deleted	data points were removed
`confirm.point.edit`		point edited
`confirm.mergetracksegments`		Track segments merged
`confirm.reverserange`		Range reversed
`confirm.addtimeoffset`		Time offset added
`confirm.addaltitudeoffset`		Altitude offset added
`confirm.rearrangewaypoints`		Waypoints rearranged
`confirm.rearrangephotos`		Photos rearranged
`confirm.splitsegments`	The %d is replaced by the number of splits	%d segment splits were made
`confirm.sewsegments`	The %d is replaced by the number of joins	%d segment joins were made
`confirm.cutandmove`		Selection moved
`confirm.pointsadded`	The %d is replaced by the number of points added	%d points added
`confirm.convertnamestotimes`		Waypoint names converted
`confirm.saveexif.ok`	Makes the message to confirm the number of photos saved	Saved %d photo files
`confirm.undo.single`		operation undone
`confirm.undo.multi`	These two make the message "<number> operations undone" to confirm that they were undone successfully	operations undone
`confirm.jpegload.single`		photo was added
`confirm.jpegload.multi`		photos were added
`confirm.media.connect`	Either a photo or an audio was connected	media connected
`confirm.photo.disconnect`		photo disconnected
`confirm.audio.disconnect`		audio disconnected
`confirm.media.removed`	<filename> removed	removed
`confirm.correlatephotos.single`	Confirm one photo correlation	photo was correlated
`confirm.correlatephotos.multi`	Confirm more than one photo correlation	photos were correlated
`confirm.rotatephoto`	current photo was rotated (by 90 degrees)	photo rotated
`confirm.createpoint`		point created
`confirm.running`	Displayed when an export is currently running (and may take some time)	Running ...
`confirm.lookupsrtm`	Makes the message "Found <number> altitude values" for SRTM lookup function	Found %d altitude values
`confirm.downloadsrtm`	Confirms download of SRTM files	Downloaded %d files to the cache
`confirm.downloadsrtm.1`	Confirms download of just 1 SRTM file	Downloaded %d file to the cache
`confirm.deletefieldvalues`		Field values deleted
`confirm.audioload`		Audio files added
`confirm.correlateaudios.single`	Confirm one audio clip correlated	audio was correlated
`confirm.correlateaudios.multi`	Confirm more than one audio clip correlated	audios were correlated
`confirm.applytimestamps`	Timestamps have now been applied or overwritten	Timestamps applied to selection

Tips, shown just once when appropriate

Id	Description	English
`tip.title`		Tip
`tip.useamapcache`	Shown when many maps are shown but cache is off	By setting up a disk cache (Settings -> Save maps to disk)\nyou can speed up the display and reduce network traffic.
`tip.learntimeparams`	Shown when estimate is called but no learn has been done	The results will be more accurate if you use\nTrack -> Learn time estimation parameters\non your recorded tracks.
`tip.downloadsrtm`	Shown when many SRTM lookups have been made with online calls	You can speed this up by setting up a disk cache\nto save the SRTM data locally.
`tip.usesrtmfor3d`	Shown when a 3d view is requested but track doesn't have altitudes	This track doesn't have altitudes.\nYou can use the SRTM functions to get approximate\naltitudes for the 3d view.
`tip.manuallycorrelateone`	Tip to recommend that at least one photo/audio is manually connected	By manually connecting at least one item, the time offset can be calculated for you.
`tip.nonstandardconfigfilename`	Suggest command line parameter if config filename isn't the normal one	By choosing a non-standard filename for the settings,\nyou'll need to tell GpsPrune at startup how to find it\nusing the "--configfile" parameter.

Buttons

Id	Description	English	Ukrainian
`button.ok`		OK	Гаразд
`button.back`		Back
`button.next`		Next
`button.finish`		Finish
`button.cancel`		Cancel	Відміна
`button.overwrite`		Overwrite
`button.moveup`	Move the selected field up one position in the list	Move up
`button.movedown`	Move the selected field down one position in the list	Move down
`button.edit`		Edit
`button.exit`		Exit
`button.close`		Close
`button.continue`		Continue
`button.yes`		Yes	Так
`button.no`		No	Ні
`button.yestoall`		Yes to all
`button.notoall`		No to all
`button.always`	Yes, and don't ask me again	Always
`button.select`		Select
`button.selectall`		Select all
`button.selectnone`		Select none
`button.preview`		Preview
`button.load`		Load
`button.guessfields`	Guess which fields go where	Guess fields
`button.showwebpage`	Launch a browser to show the given web page	Show webpage
`button.check`	Check the values in the dialog	Check
`button.resettodefaults`		Reset to defaults
`button.browse`	Open a file selection dialog to choose a file	Browse...
`button.addnew`	Add a new item, for example a new map source	Add new
`button.delete`	Delete currently selected item	Delete
`button.manage`	Open dialog for managing the item, eg map cache	Manage
`button.combine`	Used to combine the calculated parameters	Combine
`button.keepselected`	For delete by date	Keep selected
`button.deleteselected`	For delete by date	Delete selected
`button.apply`	After estimating duration, apply the results	Apply

File types

Id	Description	English
`filetype.txt`	Text files	TXT files
`filetype.jpeg`		JPG files
`filetype.kmlkmz`	KML and KMZ	KML, KMZ files
`filetype.kml`		KML files
`filetype.kmz`		KMZ files
`filetype.gpx`		GPX files
`filetype.pov`		POV files
`filetype.svg`		SVG files
`filetype.png`		PNG files
`filetype.audio`		MP3, OGG, WAV files

Display components

Id	Description	English	Ukrainian
`display.nodata`		No data loaded	Жодних даних не завантажено
`display.noaltitudes`	Altitude chart can't be shown	Track data does not include altitudes
`display.notimestamps`	Speed chart can't be shown	Track data does not include timestamps
`display.novalues`	Chart for another field can't be shown	Track data does not include values for this field
`details.trackdetails`		Track details	Подробиці треку
`details.notrack`		No track loaded	Жодного треку не завантажено
`details.track.points`		Points	Точки
`details.track.file`		File	Файл
`details.track.numfiles`	Number of files loaded	Number of files
`details.pointdetails`		Point details	Подробиці точки
`details.index.selected`		Index
`details.index.of`	These two make the message "Index 32 of 425" if there are 425 points and number 32 is selected	of
`details.nopointselection`		No point selected	Точку не вибрано
`details.photofile`		Photo file
`details.norangeselection`		No range selected	Діапазон не вибрано
`details.rangedetails`		Range details	Подробиці діапазону
`details.range.selected`		Selected
`details.range.to`	These two make the message "Selected 128 to 181" if the current range goes from point number 128 to number 181	to
`details.altitude.to`	Makes the message "139m to 1128m" if that is the altitude range of the selection	to
`details.range.climb`	The total amount of upwards climb during the selection	Climb
`details.range.descent`	The total amount of downwards descent during the selection	Descent
`details.coordformat`		Coordinate format	Формат координат
`details.distanceunits`		Distance units	Одиниці відстані
`display.range.time.secs`		s
`display.range.time.mins`		m
`display.range.time.hours`		h
`display.range.time.days`		d
`details.range.avespeed`		Ave speed
`details.range.maxspeed`		Maximum speed
`details.range.numsegments`		Number of segments
`details.range.pace`	Time for 1 km or 1 mile	Pace
`details.range.gradient`	Total altitude difference as percentage of total distance	Gradient
`details.lists.waypoints`	Headings above list boxes	Waypoints	Шляхові точки
`details.lists.photos`		Photos	Світлини
`details.lists.audio`		Audio
`details.photodetails`		Photo details	Подробиці світлини
`details.nophoto`		No photo selected	Світлину не вибрано
`details.photo.loading`	Shown when thumbnail loading	Loading
`details.photo.bearing`	Direction in which photo was taken (degrees)	Bearing
`details.media.connected`	Is the photo / audio associated with a point	Connected
`details.media.fullpath`	Full filename or URL of photo/audio	Full path
`details.audiodetails`		Audio details
`details.noaudio`		No audio clip selected
`details.audio.file`		Audio file
`details.audio.playing`	Shown in the progress bar when an audio clip is currently playing	playing...
`map.overzoom`	Message shown when zoom is too high for maps	No maps available at this zoom level

Field names

Id	Description	English
`fieldname.latitude`		Latitude
`fieldname.longitude`		Longitude
`fieldname.coordinates`	Both latitude and longitude together	Coordinates
`fieldname.altitude`		Altitude
`fieldname.timestamp`	Timestamp of single point	Time
`fieldname.time`	Time as an axis variable	Time
`fieldname.date`	Just the date, without time of day	Date
`fieldname.waypointname`		Name
`fieldname.waypointtype`		Type
`fieldname.newsegment`		Segment
`fieldname.custom`		Custom
`fieldname.prefix`		Field
`fieldname.distance`		Distance
`fieldname.duration`		Duration
`fieldname.speed`		Speed
`fieldname.verticalspeed`		Vertical speed
`fieldname.description`		Description
`fieldname.comment`	cmt field from gpx	Comment
`fieldname.mediafilename`	Photo filename or Audio filename	Filename

Measurement units

Id	Description	English
`units.original`	use the original format	Original
`units.default`	use the default format	Default
`units.metres`		Metres
`units.metres.short`		m
`units.feet`		Feet
`units.feet.short`		ft
`units.kilometres`		Kilometres
`units.kilometres.short`		km
`units.kilometresperhour`		km per hour
`units.kilometresperhour.short`		km/h
`units.miles`		Miles
`units.miles.short`		mi
`units.milesperhour`		miles per hour
`units.milesperhour.short`		mph
`units.nauticalmiles`		Nautical miles
`units.nauticalmiles.short`		N.m.
`units.nauticalmilesperhour.short`	knots	kts
`units.metrespersec`	for vertical speed	metres per second
`units.metrespersec.short`	for vertical speed	m/s
`units.feetpersec`	for vertical speed	feet per second
`units.feetpersec.short`	for vertical speed	ft/s
`units.hours`		hours
`units.minutes`		minutes
`units.seconds`		seconds
`units.degminsec`		Deg-min-sec
`units.degmin`		Deg-min
`units.deg`		Degrees
`units.iso8601`	long timestamp format	ISO 8601
`units.degreescelsius`	for temperatures in Celsius	Celsius
`units.degreescelsius.short`		°C
`units.degreesfahrenheit`	for temperatures in Fahrenheit	Fahrenheit
`units.degreesfahrenheit.short`		°F

How to combine conditions, such as filters

Id	Description	English	Ukrainian
`logic.and`	both must be true	and
`logic.or`	either can be true	or

External urls

Id	Description	English	Ukrainian
`url.googlemaps`	hostname for google maps	maps.google.co.uk	maps.google.com.ua
`wikipedia.lang`	language code for wikipedia	en	uk
`openweathermap.lang`	language code for openweathermap.org	en	ua
`webservice.peakfinder`		Open Peakfinder.org
`webservice.geohack`		Open Geohack page

Cardinals for 3d plots

Id	Description	English	Ukrainian
`cardinal.n`		N
`cardinal.s`		S
`cardinal.e`		E
`cardinal.w`		W

Undo operations

Id	Description	English
`undo.load`	load data	load data
`undo.loadphotos`		load photos
`undo.loadaudios`		load audio clips
`undo.editpoint`		edit point
`undo.deletepoint`		delete point
`undo.removephoto`		remove photo
`undo.removeaudio`		remove audio clip
`undo.deleterange`		delete range
`undo.croptrack`		crop track
`undo.deletemarked`		delete points
`undo.insert`		insert points
`undo.reverse`		reverse range
`undo.mergetracksegments`		merge track segments
`undo.splitsegments`		split track segments
`undo.sewsegments`		sew track segments
`undo.addtimeoffset`		add time offset
`undo.addaltitudeoffset`		add altitude offset
`undo.rearrangewaypoints`		rearrange waypoints
`undo.cutandmove`		move section
`undo.connect`		connect
`undo.disconnect`		disconnect
`undo.correlatephotos`		correlate photos
`undo.rearrangephotos`		rearrange photos
`undo.rotatephoto`		rotate photo
`undo.createpoint`		create point
`undo.convertnamestotimes`		convert names to times
`undo.lookupsrtm`		lookup altitudes from SRTM
`undo.deletefieldvalues`		delete field values
`undo.correlateaudios`		correlate audios
`undo.applytimestamps`		apply timestamps

Error messages

Id	Description	English
`error.save.dialogtitle`		Error saving data
`error.save.nodata`		No data to save
`error.save.failed`		Failed to save the data to file
`error.saveexif.filenotfound`		Failed to find photo file
`error.saveexif.cannotoverwrite1`		Photo file
`error.saveexif.cannotoverwrite2`	These two together make the message when a photo is read-only but overwrite has been selected	is read-only and can't be overwritten. Write to copy?
`error.saveexif.failed`	Makes the message when (number) of images failed to be saved	Failed to save %d of the images
`error.saveexif.forced`	Makes the warning when (number) of images were forced	%d of the images required forcing
`error.load.dialogtitle`		Error loading data
`error.load.noread`	Error message for when the file can't be read at all	Cannot read file
`error.load.nopoints`	Error message shown when no points found	No coordinate information found in the file
`error.load.unknownxml`	XML file isn't kml or gpx	Unrecognised xml format:
`error.load.noxmlinzip`	Zip file or Kmz file opened but no xml file found inside	No xml file found inside zip file
`error.load.othererror`		Error reading file:
`error.load.nopointsintext`	Pasted text not valid	No coordinate information found
`error.jpegload.dialogtitle`		Error loading photos
`error.jpegload.nofilesfound`	No files found	No files found
`error.jpegload.nojpegsfound`	No jpeg files found	No jpeg files found
`error.jpegload.nogpsfound`	No jpeg files with gps data in exif	No GPS information found
`error.audioload.nofilesfound`		No audio clips found
`error.gpsload.unknown`	Something went wrong with gps load but no error message given	Unknown error
`error.undofailed.title`		Undo failed
`error.undofailed.text`		Failed to undo operation
`error.function.noop.title`		Function had no effect
`error.rearrange.noop`	Update: Now just POINTS, not waypoints	Rearranging points had no effect
`error.function.notavailable.title`		Function not available
`error.function.nojava3d`		This function requires the Java3d library.
`error.3d`	Error with 3d display	An error occurred with the 3d display
`error.readme.notfound`		Readme file not found
`error.osmimage.dialogtitle`		Error loading map images
`error.osmimage.failed`	Probably there is no network connection	Failed to load map images. Please check internet connection.
`error.language.wrongfile`	Probably just chose the wrong file	The selected file doesn't appear to be a language file for GpsPrune
`error.convertnamestotimes.nonames`	Either no waypoint names were found, or they couldn't be converted	No names could be converted into times
`error.lookupsrtm.nonefound`	Either no tiles found for this area, or data contains voids	No altitude values available for these points
`error.lookupsrtm.nonerequired`	No points found without altitudes, so nothing to lookup	All points already have altitudes, so there's nothing to lookup
`error.srtm.authenticationfailed`	Username or password was rejected by the NASA SRTM server	Authentication failed, please check the password in the SRTM settings
`error.showphoto.failed`	Popup launched but photo can't be loaded (maybe moved?)	Failed to load photo
`error.playaudiofailed`	Java couldn't play it and the Desktop call failed too	Failed to play audio clip
`error.cache.notthere`	The 'manage' button was clicked but the directory is no longer there	The tile cache directory was not found
`error.cache.empty`	The tile cache directory is there but there are no subdirectories in it	The tile cache directory is empty
`error.cache.cannotdelete`	Either we haven't got permission to delete or none are too old	No tiles could be deleted
`error.learnestimationparams.failed`	Error when learning the estimation parameters failed - the track is too short or doesn't have enough data	Cannot learn the parameters from this track.\nTry loading more tracks.
`error.tracksplit.nosplit`	The split function couldn't find any places to split the track	The track could not be split
`error.sewsegments.nothingdone`	Sew segment operation couldn't do anything (also show number of segments)	No segments could be sewn together.\nThere are now %d segments in the track.

Last updated 2022-08-26.